3 Pack Caulking Tube Extension
SKU: 4078
Ideal for hard to reach jobs as it creates an airtight seal and bends up to 180 degrees. For extended length, two or more attachments can be adjoined together.
FEATURES:
• Ideal For Hard To Reach Jobs
• Bends up to 180°
• Air Tight Seal
• Attaches To All Caulking And Adhesive Tubes
• Removable and Reusable
• Adjoin Extenders For Longer Reach
DIRECTIONS:
• Prepare the caulk tube by placing it in a caulking gun and cutting the tip of the spout so the product can be extruded.
• Decide on your desired length of extension.
• Remove the cap from the extender or multiple extenders if additional length is needed. Hold the extender in one hand. Hold the caulk tube nozzle in the other hand to prevent it from spinning as you tighten the nut.
• Secure the extender nut by applying pressure and turning the nut in a clockwise direction while pressing down onto the caulk nozzle.
• Cut the Tip of the extension to the desired angle and size. This will determine the caulk bead size.
For Extended length, two or more attachments can be adjoined together following the same process. To remove, turn the extender in a counterclockwise motion while holding the caulk nozzle to prevent unwanted rotation. Normal caulking can now resume or a new extender can be attached if desired.
FEATURES:
• Ideal For Hard To Reach Jobs
• Bends up to 180°
• Air Tight Seal
• Attaches To All Caulking And Adhesive Tubes
• Removable and Reusable
• Adjoin Extenders For Longer Reach
DIRECTIONS:
• Prepare the caulk tube by placing it in a caulking gun and cutting the tip of the spout so the product can be extruded.
• Decide on your desired length of extension.
• Remove the cap from the extender or multiple extenders if additional length is needed. Hold the extender in one hand. Hold the caulk tube nozzle in the other hand to prevent it from spinning as you tighten the nut.
• Secure the extender nut by applying pressure and turning the nut in a clockwise direction while pressing down onto the caulk nozzle.
• Cut the Tip of the extension to the desired angle and size. This will determine the caulk bead size.
For Extended length, two or more attachments can be adjoined together following the same process. To remove, turn the extender in a counterclockwise motion while holding the caulk nozzle to prevent unwanted rotation. Normal caulking can now resume or a new extender can be attached if desired.
|
Related Products